I hadn’t worked with Asetek Racing prior to May of this year, but since then, I’ve steadily grown more and more impressed with both their line of sim racing products, as well as their team and company in general. This is a sim rig company that has the gear to appeal to the highest end consumers, as well as one that’s continued to make conscious decisions to cater to those with a small budget or that simply might not have the time investment to dive in as hard into the medium as others.
Related
Asetek’s New Initium DD10 Wheelbase Brings Seamless, High Quality Sim Racing to Xbox
Dreaming of sim racing, but crave the simplicity of a console? Read ahead.
Case in point is their Initium line of products, which can get you out the door for around $1,000 with a fantastic, fully functional sim rig to add to your home gaming setup. I myself have an Initium rig, and it’s allowed me to finally be a part of the sim racing community in a way I didn’t really think was ever going to be possible for me.
All of this leads into why I was once again so keen to check in with the Asetek team while I was in Germany for gamescom 2026. While I chatted with the team at the booth, I also got to go hands-on with several new products and quality of life improvements that the team is rolling out this fall. This time around, we’ll be talking about a range of exciting new updates from Asetek, including new developments geared towards the lower tier of their product line, as well as some new gear and implementations for the higher end.
The Virtual Button Box
First, let’s discuss the brand-new Virtual Button Box update that Asetek has rolled out for users, which is actually 100% free, already available, and simply requires an update to their Race Hub software in order to start using. The Virtual Button box uses your wheel’s touchscreen in order to populate six entirely customizable additional buttons, which is a very cool QoL improvement to the hardware.
Now, with the swipe of a finger, you can bring up these six touchscreen buttons, which pop up at the specific size and locations you’ve chosen in Race Hub. There’s a huge number of Virtual Button Box combinations you can build for yourself, but one awesome use case I was shown is setting the buttons to control all of your pit lane choices. For example, you can map your Virtual Button Box to allow you to quickly choose the amount of fuel you want to add during a pit stop, as well as which tire compound you want to leave the pits on.
Since the Virtual Button Box requires a touchscreen to actually use, that means it’s compatible with the Asetek Forte and Invicta lines of wheels, but not the Initium.
It can get as broad or as granular as you like with your button selections, and having these options a touchscreen away is a very smooth process compared to fumbling around with a mouse or even toggling knobs or buttons on your wheel itself in some cases.
I’ve steadily grown more and more impressed with both their line of sim racing products, as well as their team and company in general.
I also was impressed to learn the colors of the text can be adjusted on your Virtual Button Box buttons, meaning that instead of actually looking down at your wheel to make a selection, you can learn which color in your peripheral vision corresponds to which button, so you don’t even need to take your eyes off the action to use this feature.
As previously mentioned, the Virtual Button Box has already launched for free, so simply update your Race Hub software to start customizing if you have a compatible wheel.
The Upcoming Peripherals and Components
Load Cell Handbrake and Dual Mode Shifter
Next up, I got to test out Asetek’s new Load Cell Handbrake and Dual Mode Shifter, which are launching soon on October 6th. Both of these products have been developed in partnership with and signed-off on by real racers who vouch for the realism and feel of these upcoming peripherals. Using a small mount on the side of your rig frame, you can attach both of these pieces to your existing setup.
For me, the Dual Mode Shifter is an absolute blast to use. I tested it while playing WRC with the shifter set to sequential order (though it can be set to H-Pattern too, of course). While I’ve never had a problem using the paddle shifters on my wheel, there is just something exciting and visceral-feeling about using a physical shifter stick, and Asetek’s Dual Mode unit is really as cool as it gets. It feels very premium, and the feedback and “oomph” you get while using it is well worth consideration, in my opinion. I’m already wanting to add this piece to my rig after going hands-on. The Dual Mode Shifter will cost $219.
I was also thoroughly impressed with the Load Cell Handbrake, and in a game like WRC, it goes a long way towards further immersion and is a fun additional challenge if you’ve never used one before. It’s simple to use, since you just pull the lever to engage the brake, but feels great and pairs brilliantly with the shifter next to it. I’d say the handbrake is a bit more situational for players depending on what sim games they typically gravitate towards, but if it makes sense for your playstyle, it’s a great product as well. The Load Cell Handbrake will be listed at $179.
Related
Interview: Asetek CEO André Eriksen on Sim Racing, Affordability, Access, and Xbox
Some great insight from André Eriksen of Asetek, gathered at the SimRacing Expo 2026 in Charlotte.
Initium DD10 Wheelbase
I’ve touched on the upcoming Initium DD10 Wheelbase earlier this year, but it’s still worth mentioning that we’re rolling closer and closer to the product’s release date, which is currently expected by the end of October (exact date forthcoming). There’s already an existing Initium wheelbase, which I’ve been using and absolutely gets the job done well.
Still, the current Initium wheelbase features 5.5 Nm of torque, upgradable to 8 Nm with the optional/additional boost kit. The upcoming DD10, on the other hand, starts at 10 Nm of torque right out of the box, upgradable to a whopping 14 Nm. What this means is more realistic and dynamic force feedback for your steering wheel, which definitely goes a long way in further immersion and simulation for your setup.
The DD10 wheelbase will also be compatible with other wheels outside of the Asetek ecosystem, just in case you already have another product but still want to invest in the Asetek wheelbase. It’s also going to be compatible with XBOX consoles once this functionality is totally ready to go, which is incredibly exciting as well.
Almost Ready for XBOX
When I interviewed Asetek’s CEO, André Eriksen, at the Sim Racing Expo in Charlotte back in May, something he was very adamant about was removing typical barriers into the world of sim racing for the consumer. One of the big examples of this was the cheaper yet awesome Initium line of products, and another was the team’s upcoming compatibility with XBOX.
In a world of skyrocketing component prices, software updates, and general complications of use that pop up from time to time, there’s really no denying that console gaming is simply more accessible than PC. In an effort to appeal to gamers that want to get into sim racing, but don’t want to mess with any potential hassle that comes with PC gaming, Asetek has been working on full XBOX console compatibility.
Products have been developed in partnership with and signed-off on by real racers.
At gamescom, I got to test out both a desk setup and a full rig setup of Asetek gear running on an XBOX Series X, and the experience was perfect. I got to test out WRC in this setting, and I personally found it very exciting to finally see this Asetek/XBOX partnership up and running after hearing about it since May.
The one additional note here is that the Asetek Race Hub software is still only available on PC, so you’ll need to connect your rig to a computer to customize your gear settings before then connecting to your XBOX and being on your way with all your settings successfully stored. Thankfully, you can do this from virtually any computer, so you don’t need some kind of powerhouse rig simply to set everything up for XBOX.
Clearly, Asetek has been cooking up a lot of awesome things lately, and I know I’m personally very excited to see all of these new products and improvements roll out during the rest of 2026.
Next
SimRacing Expo 2026 Roundup: 10 Sim Racing Products You Should Check Out
Sim racing enthusiasts have a lot to be excited about.

